Filter
Top Products
SECTION 14 : Getting Label Print Job Started
40
4) Place a print medium into the P-55 and click Print
next to Positioning pattern on the Maintenance
tab.
5) The P-55 starts printing the first test pattern.
*
The first test pattern is printed as shown on the left.
6) Take out the medium from the tray. Then, with the
medium rotated by 180 degrees, place the medium
back into the tray so that the two black printed areas
on the medium are set toward the printer side and
aligned horizontally as shown by the thick arrows.
*Move the medium to the right as shown by the red thin
arrows to bring the hold pins located in the center of the
tray into contact with the left side of the center spindle hole
of the medium so that the hold pins and the black bars
marked on the medium are aligned vertically as shown.
7) Click Repeat on the Maintenance tab.
* The second test pattern is printed as shown on the left.