Filter
Top Products
SECTION 14 : Getting Label Print Job Started
39
2. Correcting for displacement and hue shift between colors
With the P-55 you can correct for displacement of boundaries and hue shift between colors. These
corrections are made by first printing test patterns and then reading and entering necessary
corrective values from the printed patterns.
1) Correcting for displacement
1) Select Printers & Faxes from Start. (In Windows
2000, select Start --> Settings --> Printers.)
2) Right-click the icon for TEAC P-55 Disc Label
Printer and select Printing Preferences.
3) Click the Maintenance tab.
To correct displacement and hue shift between
colors
Correction values are specified for PHOTO and COLOR (*1)
ribbons each. The type of ribbon displayed on the standard
tab is the type of ribbon installed in your P-55.(*2)
If the type of ribbon displayed is different from the type of
ribbon installed, close the Printing Preferences window
and then open it again.
If, with the Printing Preferences window open, you replace
the current ribbon with a ribbon of a different type and
correct displacement and hue shift between colors, the
settings take effect for the ribbon that was installed before
replacement, not the ribbon currently installed.
Make sure you close the Printing Preferences window first
before replacing the ribbon with a ribbon of another type and
correcting displacement and hue shift between colors. Then,
replace ribbons, open Printing Preferences again, and
change the correction settings.
(*1) --- The same values as for COLOR ribbon take effect for black
ribbon.
(*2) --- The type of ribbon is displayed in the field for Ribbon type
circled as shown in the left-hand image.
CAUTION