Filter
Top Products
SECTION 10 : Installing the Printer Driver
21
The message indicates the software has been installed
successfully. Click Finish.
*In Windows, click Start, select Printers and Faxes, and
make sure the icon representing TEAC P-55 Disc Label
Printer is displayed on the screen.
To restart the computer, in Windows, click Start and
then Shut Down. Select Restart from the pull-down
menu, and click OK.
NOTE
[Printer driver operation modes]
The P-55 printer driver has the two modes.
1. [Standard Mode]
Allows the P-55 to print when the P-55 is online or connected to your Windows computer.
The computer communicates with the P-55 to obtain the information such as ribbon type, remaining ribbon amount and
operation status.
2. [Remote Mode]
Allows the P-55 to create PRN files (*Note1) when the P-55 is offline or not connected to your Windows computer.
You need to specify the ribbon type you want to use in Printing Preferences as the P-55 does not communicate directly
with your PC for the information.
To switch the P-55 printer driver between standard mode and remote mode, execute the application tool setmode.exe. To
locate the tool, double-click the icon for the attached CD-ROM “P-55 UTILITY SOFTWARE” to open. Double-click the
folder “Support” and then “SetMode.”
* For instruction details, read the file readme_en.txt found in the same folder as the application tool.
*NOTE1: [PRN file]
The PRN file is image data for which settings including the ribbon type, size of disc to be printed, correction method, and
color balance been effective. For details, see 9) of SECTION 14 : Getting Label Print Job Started