Filter
Top Products
SECTION 14 : Getting Label Print Job Started
44
5) After the second test pattern has been
printed, take out the medium from the disc
tray.
6) Find out the longest line that is aligned with,
or is least displaced with respect to, a scale
mark. (You can use either the upper and
lower scales or the left and right scales.) In
the above example, you can get a value of +2
on the upper scale and a value of -3 on the
lower scale. Add the two numbers and you
get -1. Enter this -1 in the Print Length box on
the Maintenance tab and click OK.