Filter
Top Products
SM320F2812-HT
SGUS062A–JUNE 2009–REVISED APRIL 2010
www.ti.com
Table 6-47. AC Specifications
(1) (2)
T
A
= –55°C to 125°C T
A
= 220°C
PARAMETER UNIT
MIN TYP MAX MIN TYP MAX
SINAD Signal-to-noise ratio + distortion 62 57 dB
SNR Signal-to-noise ratio 62 57 dB
THD Total harmonic distortion -68 -68 dB
ENOB (SNR) Effective number of bits 10.1 9.1 Bits
SFDR Spurious free dynamic range 69 68 dB
(1) Not production tested.
(2) Validated at the following conditions: ADC Input Frequency = 10.71 KHz, XCLKIN = 30 MHz, PLLCR = 0xA (SYSCLK = 150 MHz),
HSPCP = 3 (ADCCLK= 25 MHz), ADCCLKPS = 1 (ADCCLK= 12.5 MHz), CPS = 0 (ADCCLK =12.5 MHZ), ACQ_PS (SH) = 3
6.29.3 Current Consumption for Different ADC Configurations (at 25-MHz ADCCLK)
Table 6-48. Current Consumption
(1)
I
DDA
(TYP)
(2)
I
DDAIO
(TYP) I
DD1
(TYP) ADC OPERATING MODE/CONDITIONS
(3)
Mode A (Operational Mode):
40 mA 1 mA 0.5 mA –BG and REF enabled
–PWD disabled
Mode B:
–ADC clock enabled
7 mA 0 5 mA
–BG and REF enabled
–PWD enabled
Mode C:
–ADC clock enabled
1 mA 0 5 mA
–BG and REF disabled
–PWD enabled
Mode D:
–ADC clock disabled
1 mA 0 0
–BG and REF disabled
–PWD enabled
(1) Not production tested.
(2) IDDA – includes current into V
DDA1
/ V
DDA2
and AV
DDREFBG
(3) Test Conditions: SYSCLKOUT = 150 MHz
ADC module clock = 25 MHz
ADC performing a continuous conversion of all 16 channels in Mode A
136 Electrical Specifications Copyright © 2009–2010, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): SM320F2812-HT