Filter
Top Products
TNETX4090
ThunderSWITCH II
9-PORT 100-/1000-MBIT/S ETHERNET
SWITCH
SPWS044E – DECEMBER 1997 – REVISED AUGUST 1999
66
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MII (ports 0–8)
Figures 21–23 show the timing for the eight MIIs operating at either 10-Mbit/s or 100-Mbit/s, and the GMII
operating at 100-Mbit/s.
Mxx_CRS and Mxx_COL are driven asynchronously by the PHY. Mxx_RXD3–Mxx_RXD0 is driven by the PHY
on the falling edge of Mxx_RCLK. Mxx_RXD3–Mxx_RXD0 timing must be met during clock periods in which
Mxx_RXDV is asserted. Mxx_RXDV is asserted and deasserted by the PHY on the falling edge of Mxx_RCLK.
Mxx_RXER is driven by the PHY on the falling edge of Mxx_RCLK.
MII receive (see Figure 21)
NO. MIN MAX UNIT
1 t
su(Mxx_RXD)
Setup time, Mxx_RXD3–Mxx_RXD0 valid before Mxx_RCLK↑ 8 ns
1 t
su(Mxx_RXDV)
Setup time, Mxx_RXDV valid before Mxx_RCLK↑ 8 ns
1 t
su(Mxx_RXER)
Setup time, Mxx_RXER valid before Mxx_RCLK↑ 8 ns
2 t
h(Mxx_RXD)
Hold time, Mxx_RXD3–Mxx_RXD0 valid after Mxx_RCLK↑ 8 ns
2 t
h(Mxx_RXDV)
Hold time, Mxx_RXDV valid after Mxx_RCLK↑ 8 ns
2 t
h(Mxx_RXER)
Hold time, Mxx_RXER valid after Mxx_RCLK↑ 8 ns
Mxx_RXD3–Mxx_RXD0
Mxx_RXDV
Mxx_RXER
1 2
Mxx_RCLK
Figure 21. MII Receive
NOTE: For port 8, M08_RFCLK is used for the transmit clock input.
Mxx_CRS and Mxx_COL are driven asynchronously by the PHY. Mxx_TXD3–Mxx_TXD0 is driven by the
reconciliation sublayer synchronous to Mxx_TCLK. Mxx_TXEN is asserted and deasserted by the reconciliation
sublayer synchronous to the Mxx_TCLK rising edge. Mxx_TXER is driven synchronous to the rising edge of
Mxx_TCLK.