Filter
Top Products
125
Mobile Computing
Monitoring battery power
5.375 x 8.375 ver 2.4.1
❖ Glows amber while the battery is being charged
❖ Does not glow if the external power source is
disconnected or if the battery is completely discharged
Determining remaining battery power
NOTE: Wait at least 16 seconds after turning on the computer
before trying to monitor the remaining battery power. The
computer needs this time to check the battery’s remaining capacity
and perform its calculations.
1 Click Start, then click Control Panel.
The Control Panel opens.
2 Click Performance and Maintenance.
3 Click the Toshiba Power Saver icon.
The TOSHIBA Power Saver Properties window appears.
You can also access the TOSHIBA Power Saver Properties
window by using the TOSHIBA Console button.
4 Choose the Power Save Modes tab, then under the
Running on Batteries section, click Details.
5 Click the Power Save Mode tab.
The current power source and battery power remaining
section displays the current charge state of the battery.