Toshiba 2455 Computer Drive User Manual


 
188
Exploring Your Options
Changing the display properties setting
5.375 x 8.375 ver 2.4.1
documentation supplied with the device for additional
configuration steps.
TECHNICAL NOTE: In order to use the simultaneous mode, you
must set the resolution of the internal display panel to match the
resolution of the external display device. The external display
device must support a resolution of 640 X 480 or higher.
Display limitations
Keep in mind that the quality of the display will be limited to
the capabilities of the external video device.
If the external video device, such as an SVGA monitor, is
capable of displaying at a maximum resolution of 640 x
480 and your system is set for a higher resolution, only
part of the desktop will appear on the screen. You can
view the “lost” area by scrolling to it.
If you use the display hot key (Fn + F5) to change the
display output with the LCD Display Stretch option
enabled and the Display area (resolution) set to 640 x 480
or 800 x 600, the image on the internal display panel may
appear stretched.
NOTE: The Windows
®
XP operating system by default does not
display resolutions below 800 x 600. To display the 640 x 480
resolution, you may need to click the Settings tab in the Display
Properties window, click Advanced, click the Adapter tab, click
List all modes.