Filter
Top Products
60
Getting Started
Installing additional memory (optional)
5.375 x 8.375 ver 2.4.1
Installing additional memory (optional)
CAUTION: Before you install or remove a memory module, turn off
the computer using the Start menu. If you install or remove a
memory module while the computer is in Standby or Hibernation
mode, data will be lost.
A memory module must be installed in slot A. Do not try to
operate the computer with a memory module in slot B only.
Your computer is equipped with two memory slots which can
provide for various memory configurations. When additional
memory is added, or original memory replaced, it is
recommended that you use only compatible memory. In the
event original memory is replaced with invalid memory, the
system will beep and will not start up beyond the BIOS
memory check. A message will display. If this occurs, contact
Toshiba’s support center. See “Toshiba voice contact” on
page 256.
HINT: To purchase additional memory modules, visit the Toshiba
Web site at toshiba.com.
Your computer comes with enough memory to run most of
today’s popular applications. You may want to increase the
computer’s memory if you use complex software or process
large amounts of data.
There are two memory slots. Your system may have both
slots occupied.
CAUTION: If you use the computer for a long time, the memory
modules will become hot. If this happens, let the modules cool to
room temperature before you replace them.