Filter
Top Products
2.SETTING ITEMS (ADMIN)
Setting Network Functions 137
2 SETTING ITEMS (ADMIN)
2
Continue to another network setting if required, then press [APPLY NOW].
“NETWORK INITIALIZING” is displayed at the lower left of the screen and this equipment starts initializing the
network interface card to apply the changes. This message disappears after it is finished.
Setting the TCP/IP for static IP address
1
Press [STATIC] in the ADDRESS MODE option.
2
Specify the following items as required and complete the setting.
1) Press [IP ADDRESS] and enter the IP address of this device using the digital keys.
2) Enter the subnet mask and default gateway as required.
3) Press [OK].
You will be returned to the NETWORK menu.