Filter
Top Products
2 SETTING ITEMS (ADMIN)
166 Setting Copy Functions
Setting Copy Functions
You can change the system behavior for the copy operation, such as the maximum number of copies, auto 2-sided mode,
and the sort mode priority.
1
Press [COPY] in the ADMIN menu (1/2).
The COPY screen is displayed.
To display the ADMIN menu, see the following page:
P.75 “Entering Admin Menu”
2
Specify the following items as required and press .
MAXIMUM COPIES — Press the number button that indicates the maximum number of copies to be allowed.
The maximum number of copies to be allowed is as follows:
- For e-STUDIO6550C Series, e-STUDIO856 Series: 9999 copies
- For e-STUDIO4540C Series, e-STUDIO456 Series: 999 copies
AUTO 2-SIDE MODE — Press the button of the 2-Sided mode that initially applies to copy settings when originals
are placed in the Automatic Document Feeder.
y [OFF] — When this button is selected, the initial setting of the 2-Sided mode will be [1 -> 1 SIMPLEX] when
originals are placed in the Automatic Document Feeder.
y [1->2 DUPLEX] — When this button is selected, the initial setting of the 2-Sided mode will be [1 -> 2 DUPLEX]
when originals are placed in the Automatic Document Feeder.
y [2->2 DUPLEX] — When this button is selected, the initial setting of the 2-Sided mode will be [2 -> 2 DUPLEX]
when originals are placed in the Automatic Document Feeder.
y [USER] — When this button is selected, the screen to select the 2-Sided mode will be displayed when originals
are placed in the Automatic Document Feeder.
SORT MODE PRIORITY — Select the default sort mode that is applied for copy jobs. If [STAPLE] is selected, the
output is stapled on the upper left corner as the default. To staple copies, the optional finisher must be installed.