Filter
Top Products
2 SETTING ITEMS (ADMIN)
90 Setting General Functions
2
Check the settings on the display. If corrections are required, press [CHANGE].
If no corrections are required, press [OK] and complete the operation.
3
Make settings for the weekly timer.
1) Press the desired day of the week button.
2) Press [ON] to enter the time the device wakes up from the Sleep or Super Sleep mode.
Use the arrow buttons to move the cursor and enter “Hour” and “Minute”.
3) Press [OFF] to enter the time to put the device into the Sleep or Super sleep mode.
Use the arrow buttons to move the cursor and enter “Hour” and “Minute”.
4) Press [OK] to save the settings.
y If you want to clear an entered time, press the [CLEAR] button on the control panel.
y If you want to put the equipment into the Sleep or Super Sleep mode for an entire day, enter the same time in both
the [ON] and [OFF] boxes.
Example) When you enter “0:00” in both the [ON] and [OFF] boxes for [SUN],
the equipment automatically goes into the Sleep or Super Sleep mode at the [OFF] time specified for [SAT]. The
Sleep or Super Sleep mode is kept until the [ON] time specified for [MON] comes.
y If you do not want to put the equipment into the Sleep or Super Sleep mode for an entire day, make settings for the
desired day of the week button as follows:
[ON]: 0:00 / [OFF]: 24:00
The equipment does not go into the Sleep or Super Sleep mode for an entire day, which is activated by the weekly
timer function. However, the equipment automatically goes into the Sleep or Super sleep mode according to the
time value set for [SLEEP/SUPER SLEEP], if it is left inactive for a certain period of time.