Filter
Top Products
5. PROGRAMMING OPERATIONS
EO1-11138
5-1
5.1 Before you enter the SET Mode
5. PROGRAMMING OPERATIONS
This chapter is provided for the store programmer or the store manager who may have to change the programmed
data of the FS-2600 series ECR on the daily, weekly, or monthly basis. Usually, all the basic program data required
for your store should have already been set before delivery of the product by your local TOSHIBA TEC representative.
However, if it becomes necessary to change or add program data, please refer to this chapter. It is also recommended
that you read the OPERATOR’S GUIDE as well as other chapters of the MANAGER’S GUIDE in order to thoroughly
understand the descriptions in this chapter. If there are any unclear points or program data other than listed here that
must be changed or added, please contact your TOSHIBA TEC representative.
WARNING!
Never try to access a program item other than those shown in this chapter. If you access it
and mistakenly change important data, a malfunction may occur on your completed system.
5.1 Before you enter the SET Mode
Please note that you should use the REG Mode Keyboard Sheet or the SET Mode Keyboard Sheet that is proper
for each program item. The SET Mode Keyboard Sheet is printed on the reverse side of the REG Mode
Keyboard Sheet. Refer to the following list.
5.1.1 Program items that require the REG Mode Keyboard Sheet
• PLU Stock Loading and Changing (Submode 24)
• PLU Preset-code Key and Display Key Setting (Submode 27)
• PLU Preset Price Setting and Changing (Submode 60)
• %+ and %- Rate Setting
• Selective Itemizer Rate Setting
• Foreign Currency Exchange Rate Setting
• Store/Register No. Setting
5.1.2 Program items that require the SET Mode Keyboard Sheet
• Store Name/Message, Commercial Message, Footer Logo Message Programming (Submode 1)
• Cashier Programming (Submode 2)
• Department Table Programming (Submode 3)
• PLU Table Setting (Submode 4)
• Time Setting and Adjustment (Submode 5)
• Date Setting and Adjustment (Submode 6)
• Hourly Range Setting (Submode 7)
• Amount Limit Setting for Function Keys and Guests (Submode 8)
• Non-taxable Limit Amount and Gratuity Rate Setting (Submode 12)
• Minor Group Name Programming (Submode 13)
• Major Group Name Programming (Submode 14)
• Guest File Table Setting (Submode 15)
• Combination Report Table Programming (Submode 19)
• Tare Table and Scale Unit Weight Programming (Submode 26)
• PLU Group Name Programming (Submode 29)
• RKP Message Programming (Submode 30)
• Display Message Programming (Submode 31)
• Amount Limit Setting for the [DISC] Key (Submode 35)
• Set Menu Table Programming (Submode 42)
• Combo Sale Table Programming (Submode 43)
• Guest Check Commercial Message Programming (Submode 45)