Filter
Top Products
1. OPERATIONS BEFORE IN-LINE SERVICE
EO1-11138
1-1
1.1 Terminal Open Check
1. OPERATIONS BEFORE IN-LINE SERVICE
Before entering in-line service operations (In-line Report takings, DLLs, etc.), the following operations are
available if necessary.
1.1 Terminal Open Check
This operation sends a dummy text to those terminals set in the Terminal Connection Table (Submode 69), and
prints out the Register Nos. of the disconnected terminals (i.e. terminals not responding).
CONDITION Any time outside a sale (operable on the Master Terminal)
OPERATION Mode Lock: X and RTR Declaration ON
Through the Operator Display
Select “5 OTHERS”. Select “80 T/M OPEN CHK”.
*
X/GTX
*
02-06-1999 03:04
RTR
1 X
2 GTX
3 PROGRAM READ
4 E-JOURNAL
5 OTHERS
Please select operation by Enter key.
0.00
TOTAL
0.00
COMB1 COMB2 COMB3 EJ ↓
*
X/GTX
*
02-06-1999 03:04
OTHERS RTR
80 T/M OPEN CHK
81 T/M CHK
82 PRT CHECK
90 CONSOLI READ
98 FILE VER CHK
99 INLINE LOG
Please select operation by Enter key.
0.00
Pg up Pg dw Enter ↑ ↓
Through the Keyboard
80 [AT/TL]
Master Terminal Receipt Print
When the check result is normal: When any error status is found:
Prints the Report Name only. Prints the Register Nos. of the terminals
not connected properly, as well as the Report Name.
→
12-25-1999 SAT
#3001
****************************************
****************************************
********************
X80
NOT_CONNECT
****************************************
****************************************
********************
0176 07:11TM
12-25-1999 SAT
#3001
****************************************
****************************************
********************
X80
NOT_CONNECT
#3002
#3003
****************************************
****************************************
********************
0178 07:14TM