Filter
Top Products
5. PROGRAMMING OPERATIONS
EO1-11138
5-40
5.4 How to Access a Program Item
*
SET
*
02-06-1999 12:34
PROGRAMMING DISPLAY MSG
01
02
03
04
Please input item No.
0.00
Pg up Pg dw Enter ↑ ↓
31 [X] |Message Line No.| [ST] Character Entries [ST] [AT/TL]
(1 to 4; max. 4 lines)
*
(Max. 16 characters per
line. Regular-size only.)
Repeat for other lines. * Allowed for sequential Line No. only
ex.) To set a message “WE SERVE THE CHOICEST FOOD. PLEASE ENJOY YOUR DINNER.”
Mode Lock: SET
Enter 35, depress [X].
1 [ST] WE [SPACE] SERVE [SPACE] THE [SPACE] CHO [ST]
(2 [ST]) ICEST [SPACE] FOOD. [ST] (3 [ST]) PLEASE [SPACE] ENJOY [SPACE] YOU [ST]
(4 [ST]) R [SPACE] DINNER. [ST] [AT/TL]
Journal Print
■ Display Message Programming (Submode 31)
This programming is used to set a display message which is displayed in the 16-digit dot window provided to
the customer display and the LCD operator display while the mode lock of the register is in “LOCK” position. A
display message can be used for information, welcome greeting, etc.
CONDITION Any time outside a sale When you enter 31 and depress the [X] key,
the screen shown below will appear.
OPERATION Mode Lock: SET
P31
DISPLAY MSG
#01
WE SERVE THE CHO
#02
ICEST FOOD.
#03
PLEASE ENJOY YOU
#04
R DINNER.
0052 17:59TM
NOTES: 1. You can select either of two features; “Scrolling Display; initial setting” or “16 Characters Held
Display”. If you select the feature “16 Characters Held Display”, refer to the section 9.2 Store
Message Display on page 9-2 (Operator’s Guide) to display each message.
2. When the “SCROLLING DISPLAY” feature is selected, a maximum of 64 characters can be
entered consecutively after designating Line No. 1 at first and depressing [ST] for each line end.
3. A character must be regular-sized only.
4. A DISPLAY MESSAGE set here will also appear in the REG or MGR mode if so selected by a
program option.
5. A message display on the LCD operator display is possible when the feature “16 Characters Held
Display” has been selected.