Filter
Top Products
7. PROCEDURE BEFORE OPERATION
EO1-11138
7-1
7. PROCEDURE BEFORE OPERATION
1. Unpack the accessories and the cash register from the carton.
2. Place the cash register at a proper location, referring to the Safety Precautions at the beginning of the
Operator’s Guide.
3. Remove the tapes and seals for holding parts or protecting the cash registers surfaces.
4. Plug the power cord plug into a wall outlet.
5. Insert the REG key into the Control Lock, then turn it to the REG position.
6. Before starting actual transaction entries on the cash register, ask your manager if you need additional setting
or the initial programmed data needs to be changed. For programming, refer to the following chapters in the
Manager’s Guide:
5. PROGRAMMING OPERATION (page 5-1)
6. VERIFICATION OF PROGRAMMED DATA (page 6-1)
7. PROCEDURE BEFORE OPERATION