Filter
Top Products
5. PROGRAMMING OPERATIONS
EO1-11138
5-53
P52
TENDER UP
50.00
100.00
150.00
200.00
0100 16:48TM
5.4 How to Access a Program Item
ex.) To set the following tender up table.
$50.00, $100.00, $150.00, $200.00
Mode Lock: SET
Enter 52, depress [X].
5000 [#] 10000 [#] 15000 [#] 20000 [#] [AT/TL]
Journal Print
*
SET
*
02-06-1999 12:34
PROGRAMMING MENU TABLE ↓
01
02
03
04
05
06
07
08
Please input table No.
0.00
Pg up Pg dw Enter ↑ ↓
NOTES: 1. A tender up amount should be set from a smaller to a larger.
2. If a tender up table has been programmed as follows, $50.00, $100.00, $150.00, an error will
occur when you depress the [TENDER UP] key for a sales total of more than $150.
3. To reset the tender up table once set, operate as follows.
52 [X] 0 [#] [AT/TL]
■ Display Menu Table Setting (Submode 53)
This programming is used to set a display menu table corresponding to each [DISPLAY] key.
• Programming
CONDITION Any time outside a sale When you enter 53 and depress the [X] key,
the screen shown below will appear.
OPERATION Mode Lock: SET
Address 1: Guest Name
1 [ST]
Submode No.
53 [X]
|Display Menu No.| [NS]
1 to 99
|PLU Code| [PLU]
Max. 6 digits
[#]
Address 2:
Charge Posting Limit
Amount for each Guest
2 [ST]
|Select Status| [#]
0: Select Allowed
1: Select Prohibited
(NOTE on the next page)
[AT/TL]
Repeat for another display menu table.
A maximum of 20 PLU items can be
entered in one display menu table.