Filter
Top Products
5. PROGRAMMING OPERATIONS
EO1-11138
5-60
Journal Print
5.4 How to Access a Program Item
P00
SI1%RATE
SI1 TL
7%
0140 11:04TM
NOTES: 1. Whether the calculated amount by the preset SI % rate affects (i.e. add to or subtract from) the
sale total is determined by a program option.
2. To reset the rate once set, enter 0 as the rate. (Then the rate is regarded as 100% if the option
“Non-affect” is selected. With the option “SI Affects Sale Total”, some rate other than “0” should
be programmed.)
Selective Itemizer Functions and Applications
The “Selective Itemizer” is a temporary total memory for each sale and is activated separately from the Main
Itemizer (i.e. sale total memory). If certain PLU items are programmed with the SI (selective itemizer) “net” status,
the Selective Itemizer will function to add up amounts of the SI-net status items in registering the items, while the
Main Itemizer will function to add up all the items in the sale. Thus, near the sale finalization, the operator may
read the SI content by depressing the [SI/TL] key.
A preset % rate may be programmed for each of SI1 and SI2 (on the preceding page), and whether the
calculated amount will add to, subtract from, or non-affect the sale total is a program option. Whether the amount
resulted by depressing the [SI/TL] key will print or non-print is another program option.
The applications of this function may vary from store to store. Some stores may use it for counting the service
stamps to be issued to the customers according to the sale amount of service-stampable items. In this case, the
option “SI Total Non-affects Sale Total” should be selected, and a preset % rate, 1% for example, may be set to
issue one service stamp for every $1.00. Thus the number of stamps to be issued to the customer is displayed
(and printed if so programmed) as a result of calculation with the preset % rate, but the resulted value (the
number of stamps in this case) will not affect the sale total.
Example 1) With option “SI Total Non-affects Sale Total”:
Key Operation in REG Mode Receipt/Journal Print
1
PLU000001 1.00TS
1
PLU000002 1.50T
1
PLU000003 2.00TS
SI1 TL 0.03
SUBTL 4.50
PLU 1 and PLU 3 are programmed with SI-net-status. On depressing [SI/TL], “0.03” (which is 1% of total
amount of PLU 1 “1.00” + PLU 3 “2.00”) is displayed and printed, and 3 stamps are to be issued to the
customer in this case. The sale total “4.50,” is not affected by the SI calculation.
Other stores may use it for calculating the discount amount for certain sales items during a special discount sales
period by presetting the discount % rate on the SI and programming SI-net status to certain PLUs which are
subject to the special discount.
1 [PLU] (SI-net)
2 [PLU] (non-SI)
3 [PLU] (SI-net)
[SI/TL] (1% is preset)
[AT/TL]
S: SI-net Status
Number of stamps to
be issued.