Filter
Top Products
e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE June 2005 © TOSHIBA TEC
2 - 152
1140 User
interface
Restriction of the template
function with the adminis-
trator privilege
ALL 0
<0-1>
SYS Selects the restriction of
the template function
usage setting.
0: No restriction
1: Only available with
the administrator
privilege.
1
1141 Network Display of MAC address ALL - SYS (**:**:**:**:**:**)
The address is dis-
played as above (6-byte
data is divided by a
colon at every 2 bytes).
2
1143
Network
NetwareUserAuthContext
Name2
ALL - UTY
Maximum 127 letters 12
1144
Network
NetwareUserAuthTree
Name3
ALL - UTY
Maximum 47 letters
12
1145 Mainte-
nance
(Remote)
Counter notification
Remote FAX setting
ALL - SYS Maximum 32 digits
Enter a hyphen with the
[MONITOR/PAUSE]
button.
11
1148
Network
NetwareUserAuthContext
Name3
ALL - UTY
Maximum 127 letters
12
1370 Image
process-
ing
Image quality control time
accumulating counter
ALL 0
<8 digits>
M Counts driving count of
the drum (image qual-
ity control time).
Counts up when drum
motor and image quality
control are ON.
1
1371 Image
process-
ing
Accumulated counter of
output pages since the per-
forming of image quality
control
ALL 0
<4 digits>
M Cleared to “0” by the
image quality closed-
loop control. Counts up
with the number of
printing job received
after this control.
2
1372 Image
process-
ing
Heater and energizing time
accumulating counter Dis-
play/0 clearing
ALL 0
<8 digits>
M Counts up the heater
control time accumu-
lated (when power of
the copier is ON) but
does not count at the
Sleep Mode. When the
counter value of the
fuser belt is cleared,
this counter value is
also cleared in sync at
PM support mode.
1
1378 Image
process-
ing
Fuser roller ready tempera-
ture time accumulating
counter
ALL 0
<8 digits>
M Counts up the heater
control time accumu-
lated (on standby).
When the counter value
of the fuser belt is
cleared, this counter
value is also cleared in
sync at PM support
mode.
2
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e
05/11