Toshiba e-STUDIO281c Copier User Manual


 
June 2005 © TOSHIBA TEC e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 41
2
Notes:
1. The digit after the hyphen in “Code” of the following table is a sub code.
2. In “RAM”, the NVRAM of the board in which the data of each code is stored is indicated. “M”
stands for the LGC board and “SYS” stands for the SYS board.
Adjustment mode (05)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e
200 Develop-
ment
Initialization of
color auto-
toner sensor
light amount
correction tar-
get value
All
(Y,M,C,K)
ALL -
<0-255>
M The value starts chang-
ing approx. 3 minutes
after this adjustment
started.
The value is automati-
cally set during this
adjustment (approx. 2
minutes).
(As the value increases,
the sensor output
increases correspond-
ingly.) (Ch.3.2)
5
201 Y ALL -
<0-255>
M5
202 M ALL -
<0-255>
M5
203 C ALL -
<0-255>
M5
204 K ALL -
<0-255>
M5
206 YMC ALL -
<0-255>
M5
207 Develop-
ment
Initialization of color auto-
toner sensor light amount
correction target value
ALL
(color)
- M Initializes the color
auto-toner sensor light
amount correction tar-
get value.
6
208 Develop-
ment
Enforced correction of
color auto-toner sensor
light amount
ALL
(color)
- M Performs the color
auto-toner sensor light
amount correction forc-
ibly.
6
210 Transfer 1st transfer roller bias out-
put adjustment (When not
transferred)
ALL 225
<0-225>
M When the value
decreases, the 1st
transfer roller bias out-
put increases.
The adjustment value
becomes effective
when the Setting Mode
(08- 541, 549 and 551)
is 0 (invalid).
3
224 Transfer 2nd transfer roller bias out-
put adjustment (When
cleaning the roller [+] )
ALL 147
<0-187>
M When the value
decreases, the 2nd
transfer roller bias out-
put increases.
3
225 Transfer 2nd transfer roller bias out-
put adjustment (When
cleaning the roller [-] )
ALL 229
<188-
255>
M When the value
decreases, the 2nd
transfer roller bias out-
put increases.
3
226 Transfer 2nd transfer roller bias out-
put adjustment (Paper
interval/When not trans-
ferred)
ALL 191
<188-
255>
M When the value
decreases, the 2nd
transfer roller bias out-
put increases.
3
227-0 Transfer 2nd transfer
roller bias out-
put adjust-
ment
(Plain paper)
Single
side
ALL
(black)
159
<0-187>
M When the value
decreases, the 2nd
transfer roller bias out-
put increases.
The adjustment value
becomes effective
when the Setting Mode
(08- 544, 549 and 551)
is 0 (invalid).
14
227-1 Reverse
side at
duplexing
ALL
(black)
134
<0-187>
M14
227-2 Single
side
ALL
(color)
147
<0-187>
M14
227-3 Reverse
side at
duplexing
ALL
(color)
128
<0-187>
M14