Toshiba e-STUDIO281c Copier User Manual


 
June 2005 © TOSHIBA TEC e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 155
2
1416 Image
process-
ing
Threshold for detecting
that black toner cartridge is
nearly empty
ALL 322500
<8 digits>
M1
1422 Data
over-
write kit
HDD data overwriting type
setting
ALL 0
<0-2>
SYS Select the type of the
overwriting level; LOW,
MEDIUM, or HIGH for
deleting HDD data.
(This setting is enabled
only when the GP-1060
is installed.)
0: LOW
1: MEDIUM
2: HIGH
1
1424 Data
over-
write kit
HDD data clearing type
setting (forcible clearing)
ALL 0
<0-2>
SYS Select the type of the
overwriting level; LOW,
MEDIUM, or HIGH for
deleting HDD data.
(This setting is enabled
only when the GP-1060
is installed.)
0: LOW
1: MEDIUM
2: HIGH
1
1426 Data
over-
write kit
Forcible HDD data clearing ALL - - HDD data is cleared in
the procedure set in 08-
1424.
* This setting is
enabled only when
the GP-1060 is
installed.
3
1427 Data
over-
write kit
Forcible NVRAM data all
clearing
ALL - - When this code is per-
formed, the equipment
cannot be started up.
* This setting is
enabled only when
the GP-1060 is
installed.
3
1428 Data
over-
write kit
Forcible SRAM backup
data all clearing
ALL - - When this code is per-
formed, the equipment
cannot be started up.
* This setting is
enabled only when
the GP-1060 is
installed.
3
1429 User
interface
Margin width
(Top/Bottom, Left/Right)
ALL Front: 7/
Back: 7
<2-100/-
100-100>
SYS This setting is not
reflected in "Right",
even if the value less
than 2 is set for "Back".
10
1430 User
interface
Margin width
(Bookbinding margin)
ALL 14
<2-30>
SYS 1
1431 Network ACC
(AT_CASETTE_CHANGE)
for Printer/Box printing
ALL 1
<0-2>
SYS 0: ACC prohibited
1: Only in the same
paper direction
2: In both same direc-
tion and different
directions
1
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e
05/11