Filter
Top Products
Tests and Diagnostics
3-42 [CONFIDENTIAL] TECRA A11/S11/P11/Satellite Pro S500 Series Maintenance Manual (960-784)
Table 3-2 Error codes and error status names (2/3)
Device name Error code Error status name
FDD 01
02
03
04
08
09
10
20
40
80
60
06
EE
FDD - BAD COMMAND ERROR
FDD - ADDRESS MARK NOT FOUND
FDD - WRITE PROTECTED
FDD - RECORD NOT FOUND
FDD - DMA OVERRUN ERROR
FDD - DMA BOUNDARY ERROR
FDD - CRC ERROR
FDD - FDC ERROR
FDD - SEEK ERROR
FDD - TIME OUT ERROR
FDD - NOT DRIVE ERROR
FDD - MEDIA REMOVED
FDD - WRITE BUFFER ERROR
Printer 01
08
10
20
40
80
PRT - TIME OUT
PRT – FAULT
PRT - SELECT LINE
PRT - OUT OF PAPER
PRT - POWER OFF
PRT - BUSY LINE
ASYNC 01
02
04
08
10
20
40
80
88
05
06
RS232C - [DTR ON] TIME OUT
RS232C - [CTS ON] TIME OUT
RS232C - [RX READY] TIME OUT
RS232C - [TX FULL] TIME OUT
RS232C - PARITY ERROR
RS232C - FRAMING ERROR
RS232C - OVERRUN ERROR
RS232C - LINE STATUS ERROR
RS232C - MODEM STATUS ERROR
SIR - TIME OUT ERROR
FIR - TIME OUT ERROR
HDD 05
07
09
0B
BB
08
01
02
04
10
20
40
80
11
AA
HDD - HDC NOT RESET ERROR
HDD - DRIVE NOT INITIALIZE
HDD - DMA BOUNDARY ERROR
HDD - BAD TRACK ERROR
HDD - UNDEFINED ERROR
HDD - OVERRUN ERROR (DRQ ON)
HDD - BAD COMMAND ERROR
HDD - ADDRESS MARK NOT FOUND
HDD - RECORD NOT FOUND ERROR
HDD - ECC ERROR
HDD - HDC ERROR
HDD - SEEK ERROR
HDD - TIME OUT ERROR
HDD - ECC RECOVER ENABLE
HDD - DRIVE NOT READY