Filter
Top Products
TECRA A11/S11/P11 Satellite Pro S500 Series Maintenance Manual (960-784) [CONFIDENTIAL] 4-23
4.7 HDD
Removing the HDD
To remove the HDD, follow the steps below and refer to Figure 4-11 and 4-12.
CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause the
data loss or damage to the device.
1. Remove the following screw securing the HDD cover.
M2.55B FLAT HEAD screw 1
2. Insert your finger into the slot and lift the HDD cover to remove.
3. Remove the HDD assembly from the slot and disconnect it from the connector on the
system board.
Figure 4-11 Removing the HDD assembly
HDD cover
M2.55B FLAT HEAD
Slot
HDD assembly
Guide
Guide