Filter
Top Products
7. Set the DC fan to the fin and secure them with the following screws.
M2.03C BIND screw 2
8. Set the fan food to the DC fan.
NOTE: Make sure that the guide rib of the fan food is engaged securely.
Fan food
9. Set the fin (with the DC fan) in place and secure it with the following screws.
M2.04B BIND screw 4 (internal VGA model)
or
M2.04B BIND screw 8 (external VGA model)
NOTE: When securing the fin, be sure to secure the screws in the order of the number
marked on the fin.
10. Connect the fan harness to the connector CN3380 on the system board.
TECRA A11/S11/P11 Satellite Pro S500 Series Maintenance Manual (960-784) [CONFIDENTIAL] 4-81