Filter
Top Products
TECRA A11/S11/P11 Satellite Pro S500 Series Maintenance Manual (960-784) [CONFIDENTIAL] 4-85
Installing the MDC/SIM board
To install the MDC/SIM board, follow the steps below and refer to Figure 4-44 and 4-45.
1. Set the RJ11 harness holder to the system board while engaging the latches.
2. Secure the RJ11 harness holder with the following screw.
M2.04B BIND screw 1
3. Set the RJ11 harness into the RJ11 harness holder and connect the RJ11 harness to
the connector CN3010 on the system board.
4. Connect the RJ11 harness to the connector on the MDC.
5. Set the MDC on the system board.
6. Set the SIM board on the MDC and secure them with the following screws.
M2.06B BIND screw 2 (with SIM board)
or
M2.04B BIND screw 2 (without SIM board)
7. Connect the SIM board FFC to the connector CN9570 on the system board and
CN9670 on the SIM board.