Toshiba TMP92CM22FG Computer Hardware User Manual


 
TMP92CM22
2007-02-16
92CM22-215
4. Electrical Characteristics
4.1 Absolute Maximum Ratings
Parameter Symbol Rating Unit
Power supply voltage Vcc 0.5 to 4.0
Input voltage VIN 0.5 to Vcc + 0.5
V
Output current (1 pin) IOL 2
Output current (1 pin) IOH 2
Output current (Total) ΣIOL 80
Output current (Total) ΣIOH 80
mA
Power dissipation (Ta = 85°C) PD 600 mW
Soldering temperature (10 s) TSOLDER 260
Storage temperature TSTG 65 to 150
Operation temperature TOPR 40 to 85
°C
Note: The absolute maximum ratings are rated values that must not be exceeded during
operation, even for an instant. Any one of the ratings must not be exceeded. If any
absolute maximum rating is exceeded, the device may break down or its
performance may be degraded, causing it to catch fire or explode resulting in injury
to the user. Thus, when designing products that include this device, ensure that no
absolute maximum rating value will ever be exceeded.
Solderability of lead-free products
Tes t
parameter
Test condition Note
(1) Use of Sn-37Pb solder Bath
Solder bath temperature =230°C, Dipping time = 5 seconds
The number of times = one, Use of R-type flux
Solderability
(2) Use of Sn-3.0Ag-0.5Cu solder bath
Solder bath temperature =245°C, Dipping time = 5 seconds
The number of times = one, Use of R-type flux (use of lead-free)
Pass:
solderability rate until forming 95%