Toshiba TMP92CM22FG Computer Hardware User Manual


 
TMP92CM22
2007-02-16
92CM22-1
CMOS 32-Bit Microcontrollers
TMP92CM22FG
1. Outline and Device Characteristics
TMP92CM22 is high-speed advanced 32-bit microcontroller developed for controlling equipment,
which processes mass data.
TMP92CM22FG is a microcontroller, which has a high-performance CPU (900/H1 CPU) and
various built-in I/Os. TMP92CM22F is housed in a 100-pin flat package.
Device characteristics are as follows:
(1) CPU: 32-bit CPU (900/H1 CPU)
Compatible with TLCS-900, 900/L, 900/L1, 900/H, and 900/H2’s instruction code
16 Mbytes of linear address space
General-purpose register and register banks
Micro DMA: 8 channels (250 ns/4 bytes at f
SYS
= 20 MHz, best case)
(2) Minimum instruction execution time: 50 ns (at f
SYS
= 20 MHz)
(3) Internal memory
Internal RAM: 32 Kbytes (32-bit 1-clock access, programmable)
Internal ROM: None
RESTRICTIONS ON PRODUCT USE
070208EBP
The information contained herein is subject to change without notice. 021023_D
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety
in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such
TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
021023_A
The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer,
personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These
TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high
quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury
(“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship
instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical
instruments, all types of safety devices, etc. Unintended Usage of TOSHIBA products listed in this document shall
be made at the customer’s own risk.
021023_B
The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations. 060106_Q
The information contained herein is presented only as a guide for the applications of our products. No responsibility
is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its
use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third
parties.
021023_C
The products described in this document are subject to foreign exchange and foreign trade control laws.
060925_E
For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3 of the chapter
entitled Quality and Reliability Assurance/Handling Precautions. 030619_S