Filter
Top Products
49
Getting Started
Adding memory
5.375 x 8.375 ver 2.3
may want to increase the computer’s memory if you use
complex software or process large amounts of data.
Installing a memory module
An additional memory module can be installed in the
memory module slot on the base of the computer. You will
need a standard Phillips No. 1 screwdriver for this procedure.
To avoid damaging the computer’s screws, use a standard
Phillips No. 1 screwdriver that is in good condition.
Installing a memory module with the computer’s power on may
damage the computer, the module, or both.
The computer has one memory module slot. You can install
one memory module.
Before you install or remove a memory module, turn off the
computer using the Start menu. If you install or remove a
memory module while the computer is in Standby or
hibernation mode, data will be lost.
If the computer is on, begin at step 1; otherwise, skip to step
3.
1 If the computer is on, click Start, Turn off computer.
The Turn off computer window appears.
2 Click Turn Off.
The operating system turns off the computer.
3 Unplug and remove any cables connected to the
computer, including the AC adapter cord/cable.