Filter
Top Products
54
Getting Started
Hard Drive Recovery Utilities (for the U100 model only)
5.375 x 8.375 ver 2.3
5 Turn the computer over and restart it.
TECHNICAL NOTE: You must have at least one memory
module installed for the computer to work.
Checking total memory
When you add or remove a memory module, you can check
that the computer has recognized the change. To do this:
Click Start, Control Panel, Performance and
Maintenance, and then System. The General tab view
automatically appears and shows total memory.
If the computer does not recognize the memory
configuration, turn off the computer, remove the memory slot
cover, and make sure the memory module is seated properly
as described in step 11 of “Adding memory” starting on
page 48.
Hard Drive Recovery Utilities
(for the U100 model only)
Your computer has been configured with a hard disk partition
to allow you to recover your hard disk drive or reinstall
selected applications and software features or utilities.
It is strongly recommended that you create recovery CDs/
DVDs before using your system. For more information on
creating Recovery media see “Creating Recovery CDs/DVDs”
on page 55.
An optional writable external optical media drive that is
compatible to the computer is required to create Recovery
Discs. Visit accessories.toshiba.com for more information.
NOTE