Filter
Top Products
60
Getting Started
Hard Drive Recovery Utilities (for the U100 model only)
5.375 x 8.375 ver 2.3
Sample TOSHIBA HDD Recovery Utility screen
Recovering the original factory image
(recommended)
Recovering a hard disk drive to its factory default setting
deletes all partitions on the hard disk drive and your
information will be lost. Be sure to save your work first.
1 Press 1 on the keyboard to recover your hard disk drive to
its original factory setting. A confirmation message
displays, reminding you that all data will be lost during
the recovery process. Be sure you have saved your work
before proceeding.
2 Click Yes to begin the recovery process. Once complete,
a message displays that the HDD has been recovered.
3 Press any key on the keyboard to restart the computer.
Recovering the C: partition of the HDD only
Recovering the C: drive to its factory default setting reformats
your drive and your information on the recovered drive will be
lost. Be sure to save your work first. If you have created other
partitions (for example, a D: drive) those partitions and any
information on them will not be affected and remain intact.