Filter
Top Products
System Configuration Setup
Configuring MegaRAID IDE
164
c
Drive numbers of the physical drives included in the array
c
Stripe size (32 KB to 4 MB) which is valid for Stripe configu-
rations only
c
Whether the system is bootable from one of the configured
arrays
c
Build Array function, which is valid for Mirror array. This
option is used to build one drive from another.
Physical Drive Information
This section displays all the physical drives connected to the IDE
channels and their properties. The arrow keys<↑> and <↓> are
used to navigate the Physical Drive Information window. The
menus are as follows:
c
Channel ID (Primary or Secondary)
c
Connection ID (Master or Slave)
c
Disk array that the physical drive is a part of
c
Model number
c
Firmware Rev# (firmware version of each drive)
c
Size in MB of each drive
c
The status of each drive (online, failed, or rebuilding)
NOTE: Information listed in the Physical Drive Information
window cannot be edited. Only the <TAB>, <↑>, and <↓>
keys will work when the control is in the Physical Drive Infor-
mation window.
Physical Drive Options
In the top right corner of the Physical Drive Information are the
physical drive options. The available options are as follows:
c
Enable/Disable write cache