Filter
Top Products
Getting Started
Front view (with the front panel opened)
21
NOTE: When a STS indicator is lit amber, the corresponding
hard disk drive may be faulty. If it is found to be defective,
replace it. If your system is configured in redundancy
(RAID1), you can replace the faulty drive without interrupting
the system operation.
Shock and vibration might damage hard disk drives, causing
the loss or corruption of the data and programs recorded on
them. So always handle them carefully.
Installing and replacing a hard disk drive requires special
techniques and knowledge. So instead of installing or replac-
ing it yourself, ask an authorized MAGNIA service provider
for assistance.
An error performed during installation or replacement, espe-
cially when the system is running, might result in a system
failure and/or the corruption or loss of important data and pro-
grams.
Keep hard disk drives free from shock and vibration, espe-
cially when they are on. Even if the STS indicator is off, its
magnetic head remains in the data area and, if a shock is
given, it might destruct the data area.
When the server is switched off, the magnetic head of each
hard disk drive automatically retracts. Note that it takes about
30 seconds for a hard disk drive to stop completely.