Filter
Top Products
Installing and Removing Hardware
Removing and replacing the server panels
55
4 Remove the front panel.
See “Front panel” on page 11
5 Remove nine screws and the top panel.
Removing the top panel
Replacing the top panels (for Micro Tower Types)
Follow these steps to replace the top panel:
1 Replace the top panel to the server carefully so that it does not
catch any cable.
2 Fix the top panel using nine screws.
3 Fix the outer cover (upper and bottom) using eight screws.
4 Attach the front panel.
5 Plug the power cable.
Removing/replacing the top panel (for Rack Types)
Remove/replace the top panel after sliding the server out of the
rack.
The outer cover is not provided on Rack Types.
See “Sliding the server out of or into the rack” on page 66