TRENDnet TEW-P1U1P Network Card User Manual


 
5. On this screen, select Custom, and click the Settings button.
Figure 10: Custom Screen
6. On the Port Settings screen:
Choose LPR in the Protocol section
Enter a Queue name (L1 for Parallel port, L2 for USB port)
Ensure the LPR Byte Counting Enabled setting is Enabled.
Click OK to confirm your changes, then click Next to continue.
Figure 11: Port Settings Screen
7. Follow the prompts to complete the Wizard.
8. Go back to Printer folder, click on the new created printer and right-click on the printer
icon and select Properties
Page 14