TRENDnet TEW-P1U1P Network Card User Manual


 
IPP Client Setup - Windows 2000/XP
Windows 2000 has its own IPP Client, and there is no need to install the supplied IPP Client
Software. To use Windows 2000's IPP Client with the Wireless Print Server, follow this
procedure:
1. Start the Add Printer wizard.
2. Select Network Printer, and click "Next" to see the Locate your Printer screen, as shown
below.
Figure 39: Windows 2000 - Locate your Printer
3. Select Connect to a printer on the Internet or on your Intranet, and enter the URL of the
IPP Server as follows, where ip_address represents the IP Address of the IPP Server,
and 631 is the port number.
Port 1
ip_address:631/ipp/P1
Port 2 (if exists)
ip_address:631/ipp/P2
These entries are case sensitive. They must be
entered as shown, with "ipp" in lower case, and
P1, P2 and P3 in UPPER case.
4. If the connection can be established, and the printer on that port is on-line, the following
dialog will be displayed.
Figure 40: Windows 2000: No printer driver
Page 50