Tripp Lite B020-U08-19-IP Switch User Manual


  Open as PDF
of 59
 
40
7.2.3 Remote OSD Administration Tab
(
continued
)
7. Administration
(
continued
)
Using the New Schema
To use the new schema, do the following:
1. Savethenewschemafile(e.g.,B020-U08-19-IP.schema)inthe/
OpenLDAP/ schema/ directory.
2. Add the new schema to the slapd.conf file, as shown in the figure:
3. RestarttheLDAPserver.
4. WritetheLDIFfileandcreatethedatabaseentriesininit.ldif with the
ldapadd command, as shown in the following example: ldapadd -f
init.ldif -x -D “cn=Manager,dc=tripplite,dc=com” -w secret
ANMS – Log Server Settings
Also included in the ANMS screen are settings that are required for the
Windows-basedlogserver;MAC Address and Port. If these settings are
not entered correctly, the log server will not be able to communicate with
andpullloginformationfromtheKVMswitch.
• MACAddress:EntertheMACaddressofthecomputerthatthe
Windows-basedlogserverwasinstalledonhere.
• Port:Enter the firewall access port being used to communicate with
theWindows-basedlogserverhere.
Security
The Security page controls IP access by filtering the range of IP addresses
and/orMACaddressesthatcanaccesstheKVMswitch.IPandMAC
addressfilterscontrolaccesstotheKVMswitchbasedontheIPand/or
MACaddressesofthecomputersattemptingtoconnect.Amaximumof
100IPfiltersand100MACfiltersareallowed.
If any filters have been configured, they appear in the IP filter and/or
MAC filter list boxes.
To remove a filter from the list, simply click on it and hit the
corresponding Remove button.
Note: When clicking the Remove button, you are not prompted to confirm
the removal of the filter, it is automatically removed.
To edit a filter, simply click on it and hit the corresponding Edit button.
Adding/Editing a Filter
1. Check the IP Filter Enable or MAC Filter Enable checkbox.
2. Click on the corresponding Add button, or highlight the desired filter
and click on the corresponding Edit button. The IP Filter or MAC
Filter entry box appears.
3.IPfilterscontainFrom and To address fields, which allow you to filter
a range of IP addresses. If you only want to filter a single IP address,
just enter the same address into both the From and Tofields.MAC
filtersonlyallowyoutofilteroneMACaddressatatime.Ifyouare
addinganewfilter,simplyfillintheaddressfieldsandclickOK.If
you are editing an existing filter, replace the old address with the
correct address and click OK.
4. Select the include or exclude option underneath the filter list. This will
determine if all filters in the list are excluded from accessing the
KVM,orifonlythoseaddressesinthelistareincluded among those
thatcanaccesstheKVM.
Security – Default Webpage Name
The Default Webpage Name allows administrators to specify a login string
thatmustbeincludedaftertheIPaddresswhenaccessingtheKVMvia
web browser. For example, a default webpage name of abcdefg for a
KVMwithanIPaddressof192.168.0.126wouldrequirethefollowing
URLtobeenteredwhenaccessingtheKVMviawebbrowser:
192.168.0.126/abcdefg
201009236 93-2985.indd 40 11/18/2010 4:21:47 PM
 previous next