Filter
Top Products
50
Extend and Update the Active Directory Schema (continued )
Device Management
d) Right-click on the user’s name and select Properties.
e) On the Attribute Editor page of the dialog box that appears, select
Permission from the list.
f) Click Edit to bring up the String Attribute Editor:
g) Replace the value shown with the desired B064-Series KVM
Switch permission attribute value. (See below for details)
The Permission Attribute Value ismadeupoftwoparts;theIP
address of the B064-Series KVM Switch a user will access and a
string that indicates the access rights the user has on the B064-Series
KVM Switch at that IP address. The following rules apply to the
makeup of the permission attribute value entry:
• Anampersand(&)connectstheB064-SeriesKVMSwitch’sIP
address with the access rights string.
• Theaccessrightsstringismadeupofvariouscombinationsofthe
following characters: c w j p l v s. The characters can be entered in
upper or lower case. The meaning of the characters is provided in
the Permission String Characters table, below.
• Thecharactersintheaccessrightsstringareseparatedbyacomma
(,). There are no spaces before or after the comma.
• IfauserhasaccessrightstomorethanoneB064-SeriesKVM
Switch,eachpermissionsegmentisseparatedbyasemicolon(;).
There are no spaces before or after the semicolon.
Character Meaning
C Grants the user administrator privileges, allowing the user to configure the system.
W Allows the user to access the system via the Windows Client program.
J Allows the user to access the system via the Java applet.
L Allows the user to access log information via the user’s browser.
V Limits the user’s access to only viewing the video display.
Access rights examples are given in the table below:
User Value Meaning
User1 10.0.0.166&w,v 1. User has Windows Client and View Only rights on a B064-Series KVM Switch with an IP address
of 10.0.0.166.
2. User has no rights on any other B064-Series KVM Switch units administered by the LDAP server.
User2 10.0.0.166&j,c 1. User has Java Applet and Administrator rights on a B064-Series KVM Switch with an IP address
of 10.0.0.166.
2. User has no rights on any other B064-Series KVM Switch units administered by the LDAP server.
User3 v,l;10.0.0.164&j 1. User has View Only and Log Information rights on all B064-Series KVM Switch units administered
by the LDAP server.
2. User has Java Applet rights on a B064-Series KVM Switch with an IP address of 10.0.0.164.
User4 User has no access rights to any B064-Series KVM Switch units administered by the LDAP server.
User5 v,w User has View Only and Windows Client rights on all B064-Series KVM Switch units administered by the
LDAP server.
User6 v;10.0.0.166&;
10.0.0.164&c,
1. User has View Only rights on all B064-Series KVM Switch units administered by the LDAP server,
except for the ones with IP addresses of 10.0.0.166 and 10.0.0.164.
2. User has no access rights on the B064-Series KVM switch with an IP address of 10.0.0.166.
3. User has Administrator and Java Applet rights on the B064-Series KVM Switch with an IP address
of 10.0.0.164.