Filter
Top Products
101
Using the Close Call Feature
Setting Close Call Options
1. Press then turn the scroll control until Close
Call appears. Then press the scroll control.
Close Call feature options appear.
2. Turn the scroll control to select an option.
• Close Call Only: Lets you set the scanner
only for Close Call searching. The scanner
does not scan frequencies or channels when
this option is turned on. To select this option,
press E.
• CC Auto Store: Lets you select whether the
scanner automatically stores Close Call hits
into channels. If you turn this option on, the
scanner starts Close Call mode and stores any
Close Call hits, up to the maximum you
specified in the Max Auto Store setting. If the
scanner stores more hits this setting, it stops
Autostore operation.
Turn the scroll control to display an option, then
press the scroll control.
• Set CC Mode: Lets you select the Close Call
mode. If you turn this option on, the scanner
sets itself to its Close Call settings about once
every 2 seconds.
Turn the scroll control to display an option, then
press the scroll control.
You can also toggle this setting by pressing
then
• Set CC Override: Lets you select how the
Close Call feature works with other scanning
activities. If you turn this option off, when the
scanner detects a Close Call signal, CC
Found! and “E” to listen appear for the
time you set in Set CC Pause. Press the
scroll control when this appears to jump to and
hold on the frequency.
If this option is turned on, the scanner overrides
the current channel and goes to the Close Call
Menu
Func
BCD396T Paper OM.fm Page 101 Wednesday, March 30, 2005 8:36 PM