Filter
Top Products
13
Feature Highlights
can select from 9 different tone patterns and also set
the alert volume level independently from the main
volume level.
Automatic Channel Step – Accepts frequencies on
any valid channel step, even if it does not fall within
the band plan’s default step.
Frequency Step – Lets you select a frequency step
(5, 6.25, 7.5, 8.33, 10, 12.5,15, 20, 25, 50 or 100 kHz)
for manual mode and chain search mode. The scan-
ner’s auto step feature lets you set the scanner so it
automatically chooses the correct step.
Quick Recall – Lets you quickly select a specific
channel by choosing the system, group, and channel.
Scan/Search Delay – You can set the scanner so it
remains on a frequency up to 5 seconds after the last
transmission to wait for a possible reply.
Text Tagging – You can name each system, group,
channel, talk group ID, custom search range, and
SAME group, using up to 16 characters per name.
Unique Data Skip – Allows your scanner to skip
unwanted data transmissions and reduces birdies.
Duplicate Frequency Alert – Alerts you if you try to
enter a duplicate name or frequency already stored in
a system.
Memory Backup – If power is lost or disconnected,
the scanner retains the frequencies you programmed
in its memory.
Note: The scanner’s frequency coverage is not
continuous and does not include the cellular telephone
or UHF TV bands.
Trunk Tracking
Trunk Tracker IV
™
Operation – Follows conversations
on analog Motorola, Motorola Astro (APCO 25), EDACS,
EDACS SCAT, and LTR trunked radio systems,
including systems in VHF, UHF, 700 MHz, 800 MHz,
BCD396T Paper OM.fm Page 13 Wednesday, March 30, 2005 8:36 PM