Uniden BCD396T Scanner User Manual


 
62
Programming Radio Systems
Programming Motorola Systems
Program System
New System
MOT
Next, rotate the scroll control to select the type of
Motorola system you want to program, then briefly
press the scroll control to select it.
P25 - Use for Motorola Astro APCO 25 Digital
systems in any band
800MHz Standard - Use for 800 MHz systems
that use the standard band plan
800MHz Splinter - Use for 800 MHz systems
that use the splinter band plan (typically near
international borders)
900MHz Band - Use for 900 MHz systems
VHF band - Use for VHF systems
UHF band - Use for UHF systems
Confirm? Yes=”E” / No=”.”
Next, refer to the appropriate section to set system-
wide options. For most settings, you can accept the
default. However, for the items in bold, you must enter
information in order for your scanner to scan the
system.
See “Editing the System Name” on Page 72
See “Editing the System Quick Key” on Page 73
See “Setting System Lockout” on Page 73
See “Setting the System Hold Time” on Page 74
See “Setting the Channel Delay Time” on Page 74
See “Setting ID Scan/Search (Trunked Systems
Only)” on Page 75
See “Editing the Fleet Map (Motorola Systems
Only)” on Page 75 (must be set up for Type I
systems)
Menu
BCD396T Paper OM.fm Page 62 Wednesday, March 30, 2005 8:36 PM