Filter
Top Products
57
Other Settings
PC Control Lets you set the baud rate your
scanner uses to communicate with a personal
computer.
• Off The baud rate is not set.
• 9600 bps The baud rate is set to 9600 bps.
• 19200 bps The baud rate is set to 19,200 bps.
• 38400 bps The baud rate is set to 38,400 bps.
• 57600 bps The baud rate is set to 57,600 bps.
• 115200 bps The baud rate is set to 115,200 bps.
Using the Cloning Options
Lets you set your scanner as a master (source) or
slave (recipient), letting you transfer programming to
or from another BCD396T scanner. See “Wired Clon-
ing” on Page 57 and “On-Air Cloning” on Page 58.
Wired Cloning
Xfer Information
Wired Clone
• Master Sets the scanner to be the source
scanner.
• Slave Sets the scanner to be the recipient
scanner.
To clone (copy) data directly from one BCD396T
scanner to another BCD396T scanner, you must first
connect the scanners to each other using the included
connection cables and a DB9 null modem adapter and
DB9 gender changer (neither included), available at
most computer stores. Then you must set one scanner
as the source and the other as the destination.
Plug the smaller end of each of the included connection
cables into Remote on the right side of each scanner.
Then connect the other end of the cables together
using the null modem connector and gender changer.
Then set the scanner containing the programming you
want to transfer as the master scanner, then set the
other scanner as the slave scanner.
Menu
BCD396T Paper OM.fm Page 57 Wednesday, March 30, 2005 8:36 PM