Filter
Top Products
63
Programming Radio Systems
• See“Setting the Motorola Status Bit (Motorola Sys-
tems Only)” on Page 76
• See “Setting the End Code Operation (Motorola
Systems Only)” on Page 77
• See “Setting I-Call (Motorola and EDACS Sys-
tems Only)” on Page 77
• See “Setting Emergency Alert (Motorola and
EDACS Systems Only)” on Page 78
• See “Adjusting the P25 Level (Motorola and Con-
ventional Systems Only)” on Page 79
• See “Setting Control-Channel Only (Motorola Sys-
tems Only)” on Page 78
• See “Setting System Lockout” on Page 73
• See “Reviewing Locked Out Frequencies” on
Page 104
• See “Setting System Attenuation (Trunked Sys-
tems Only)” on Page 81
• See “Deleting Systems” on Page 81
• See “Copying Systems” on Page 81
• See “Setting System Frequencies” on Page 63
• See “Entering/Editing Motorola Channel Groups”
on Page 65
Setting System Frequencies
Program System
Select the system
Set Frequencies
Input a system frequency, then press the scroll control.
To enter additional frequencies, press , use the
scroll control to select New Frequency, then repeat
the above.
Note: If you select Control Channel Only mode (see
“Setting Control-Channel Only (Motorola Systems
Only)” on Page 78), you only need to enter the
frequency(s) that can be assigned as the control
channel. Most frequency lists usually indicate which of
the frequencies are the control channel frequencies.
Otherwise, you must enter all of the frequencies.
Menu
Menu
BCD396T Paper OM.fm Page 63 Wednesday, March 30, 2005 8:36 PM