Uniden BCD396T Scanner User Manual


 
69
Programming Radio Systems
See “Editing the Channel Name” on Page 84
See “Setting Channel Lockout” on Page 89
See “Editing the Talk Group ID” on Page 86
See “Deleting Channels” on Page 89
See “Copying/Pasting Channels” on Page 90
To program another channel within the same group,
press , then repeat the above. To create another
channel group and enter more channels, press
three times, then proceed from “Entering/Editing
EDACS Channel Groups” on Page 68.
Programming LTR Systems
Program System
New System
LT
Confirm? Yes=”E” / No=”.”
The scanner creates an empty LTR system, with a
default name of System n L.
n is a number that increments as you add new
systems. L indicates that this is an LTR system.
Next, refer to the appropriate section to set system-
wide options. For most settings, you can accept the
default. However, for the items in bold, you must enter
information in order for your scanner to scan the
system.
See “Editing the System Name” on Page 72
See “Setting the System Hold Time” on Page 74
See “Editing the System Quick Key” on Page 73
See “Setting the Channel Delay Time” on Page 74
See “Setting ID Scan/Search (Trunked Systems
Only)” on Page 75
See “Reviewing Locked Out Frequencies” on
Page 104
See “Setting Channel Attenuation (Conventional
Channels Only)” on Page 88
See “Deleting Systems” on Page 81
Menu
Menu
Menu
BCD396T Paper OM.fm Page 69 Wednesday, March 30, 2005 8:36 PM