Uniden BCD396T Scanner User Manual


 
66
Programming Radio Systems
See “Adjusting the P25 Level (Motorola and Con-
ventional Systems Only)” on Page 79
See “Editing the Channel Name” on Page 84
See “Editing the Talk Group ID” on Page 86
See “Setting Channel Lockout” on Page 89
See “Deleting Channels” on Page 89
See “Copying/Pasting Channels” on Page 90
To program another channel within the same group,
press , then repeat the above. To create another
channel group and enter more channels, press
three times, then proceed from “Entering/Editing
Motorola Channel Groups” on Page 65.
Programming EDACS Systems
Program System
New System
EDCS
Confirm? Yes=”E” / No=”.”
Next, rotate the scroll control to select the type of
EDACS system you want to program, then briefly
press the scroll control to select it.
WIDE - Use for wideband EDACS systems
NARROW - Use for narrowband EDACS systems
SCAT - Use for EDACS SCAT (Single Channel
Autonomous Trunking)
Confirm? Yes=”E” / No=”.”
The scanner creates an empty EDACS system, with a
default name of System n E.
n is a number that increments as you add new
systems. E indicates that this is an EDACS system.
Next, refer to the appropriate section to set system-
wide options. For most settings, you can accept the
default. However, for the items in bold, you must enter
information in order for your scanner to scan the
system.
Menu
Menu
Menu
BCD396T Paper OM.fm Page 66 Wednesday, March 30, 2005 8:36 PM