Filter
Top Products
93
Searching and Storing
3. Turn the scroll control until On appears to turn on
CTCSS/DCS search or until Off appears to turn it
off, then press the scroll control.
Custom Search
Custom Search lets you program and search 10
custom search ranges. You can search any of these
ranges simultaneously and select each custom search
range you set. During custom search, the scanner
searches starting with the lowest frequency in the
search range you select to the highest frequency in
the range.
Notes:
• Search ranges are preset. See “Editing a Custom
Search Range” on Page 94 to change the range.
• You cannot turn off all custom search ranges.
1. Press then turn the scroll control until
Search for ... appears. Then press the scroll
control. Or, press + Scan/Srch, then select
No. One of the search feature options appear.
2. Turn the scroll control until Custom Search
appears, then press the scroll control to select it.
The scanner starts custom search of the custom
search range you selected, stopping on any trans-
mission it finds and displaying the frequency.
Turn the scroll control to change the search
direction. An arrow appears, showing the current
search direction.
To turn search ranges on or off, press 0 and 1-9.
To hold searching, press Hold. To resume searching,
press then press Scan/Srch or Hold again.
To lock out a frequency found while searching, press
L/O. Locked Out appears and the scanner
resumes custom search.
If you turn off the active custom search range, the
scanner skips to the next custom search range and
continues searching.
Menu
Func
Func
BCD396T Paper OM.fm Page 93 Wednesday, March 30, 2005 8:36 PM