Uniden BCD396T Scanner User Manual


 
115
Care and Maintenance
Care and Mainte-nance
General Use
Turn the scanner off before disconnecting the
power.
Always write down the programmed frequencies in
the event of memory loss.
If memory is lost, simply reprogram each channel.
Always press each button firmly until you hear the
entry tone for that key entry.
Location
Do not use the scanner in high-moisture
environments such as the kitchen or bathroom.
Avoid placing the unit in direct sunlight or near
heating elements or vents.
If the scanner receives strong interference or
electrical noise, move it or its antenna away from
the source of the noise. If possible, a higher eleva-
tion might provide better reception.
Also try changing the height or angle of the
antenna.
Cleaning
Disconnect the power to the unit before cleaning.
Clean the outside of the scanner with a mild
detergent.
To prevent scratches, do not use abrasive clean-
ers or solvents. Be careful not to rub the LCD win-
dow.
Do not use excessive amounts of water.
Care and Maintenance
BCD396T Paper OM.fm Page 115 Wednesday, March 30, 2005 8:36 PM