Filter
Top Products
94
Searching and Storing
Note: If all frequencies in all active custom search
ranges are locked out, All Locked! appears and
the scanner does not stop.
Editing a Custom Search Range
You can edit up to 10 custom search ranges. The
names of the custom search ranges appear on the
display. The default custom search range names
appear as Custom 1, Custom 2, and so on.
1. Press then turn the scroll control until
Search for ... appears. Then press the scroll
control. Or press and Srch, then No. One of
the search feature options appear.
2. Turn the scroll control until Edit Custom
appears, then press the scroll control to select it.
3. Turn the scroll control until the name of the custom
search range you want to edit appears, then press
the scroll control to select it. The following options
appear as you turn the scroll control.
Edit Name - lets you edit the custom search range’s
name
Edit Srch Limit - lets you view and select the
frequency ranges to search. The scanner prompts you
to enter the upper and lower search limits.
Set Delay Time - lets you set the amount of time
the scanner will delay before continuing to search after
a transmission ends
Set Modulation - lets you set the custom search
range’s modulation type
Set Attenuator - lets you set whether the scanner
will attenuate reception by 18dB during search
Set Data Skip - lets you set whether the scanner
will skip data transmissions during search
Set Step - lets you set the custom search range’s
step (the gap between frequencies)
Menu
Func
BCD396T Paper OM.fm Page 94 Wednesday, March 30, 2005 8:36 PM