Filter
Top Products
EFP9800 ESC/POS Commands
3255 4073– 002 6– 21
Set Relative Print Position
Sets the print starting position based on the current position, in the
fundamental calculation pitch. The distance (in inches) from the current
position is calculated as: [N x (fundamental calculation pitch)]. See the Set
Fundamental Calculation Pitch command (1D 50).
Pitch N to the right is calculated as: (n1 + n2 x 256). Pitch N to the left is
calculated as:
(n1 + n2 x 256) = 65535 - N.
The print position moves right when the result is a positive number, and left
when the result is a negative number.
Hexadecimal Decimal ASCII Value of n1 Value of n2
1B 5C n1 n2 27 92 n1 n2 ESC \ n1 n2 0 -255 0 -255
Standard Mode
The horizontal direction of the fundamental calculation pitch is used to
calculate the print starting position.
Page Mode
Two types of fundamental calculation pitch are used to calculate the print
starting position, depending on the value of the Select Print Direction in Page
Mode command (1B 54 n). For more information see “Page Mode” later in this
section.
• If 1B 54 n = 0 or 2, the horizontal direction of the fundamental calculation
pitch is used.
• If 1B 54 n = 1 or 3, the vertical direction of the fundamental calculation
pitch is used.
The command is ignored when the start position specified is beyond the
beginning or end of the line or outside the printing area width or the left margin.
Select Justification
Begins justification as specified by the value of n. Any blank space (for example
as a result of setting the relative or absolute print position or a tab) is also
justified.