Filter
Top Products
EFP9800 ESC/POS Commands
6– 30 3255 4073– 002
Define User-Defined Characters
Defines user-defined alphanumeric characters for the specified character codes.
The character codes may be any between ASCII code 20-7E (95 characters
possible). User-defined characters remain in effect until:
• A different user-defined character is defined.
• The printer is initialized, reset, or turned off.
• A downloaded bit image is defined.
A user-defined character set and a downloaded bit image cannot be defined
simultaneously. When the Define User-Defined Characters command (1B 26) is
performed, the downloaded bit image is cleared.