Filter
Top Products
Diagnostics and Print Tests
3255 4073–002 3–3
After changing the DIP switch settings, cycle the printer by pressing the Reset
button off and then on again. The green Online LED flashes when the printer
cycles.
Caution
If you are changing the switch settings for a function or test, be sure you
choose the correct settings to avoid accidentally changing the settings for
another function or test. If you do accidentally change the settings, use the
switch settings shown in the tables throughout this section to change those
settings back, or return to the normal settings. For a list of normal settings,
see “Setting Switches” in section 5. If you need assistance, contact a service
representative. For more information, see “Getting Service” in section 4.